计时时钟IC/NA555/NE555/SA555/SE555Q

  • 价格

    面议

产品介绍

商品详情说明

Description

SE555Q is precision timing circuit capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor. 

The threshold and trigger levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by use of the control-voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set, and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset, and the output goes low. When the output is low, a low-impedance path is provided between discharge (DISCH) and ground. 

The output circuit is capable of sinking or sourcing current up to 200mA. Operation is specified for supplies of 5V to 15V. With a 5V supply, output levels are compatible with TTL inputs. 

Application

  • Electric Horn

Features

  • Timing from Microseconds to Hours
  • Astable or Monostable Operation
  • Adjustable Duty Cycle
  • TTL Compatible Output Can Source or Sink up to 200mA
  • Automotive Grade
  • "Green" Molding Compound (No Br, Sb)
联系电话:0755-83222938
导航菜单 W1204 H50
  • 联系方式

  • 0755-83222938

  • 12365452@qq.com

  • 广东省深圳市红荔路(华强北路)上步工业区101栋588室(福田办事处)

    微信公众号
版权所有 深圳市博金凯科技有限公司 CopyRight 2003 - 2019 All Right Reserved 备案号:域名备案中  网站地图XML